If you're planning a driveway, patio, sidewalk, or commercial slab in Texas, one of the first questions you'll have is: how much will it cost?
The short answer is that concrete flatwork in Texas typically ranges from $6 to $15 per square foot, depending on several factors. Here's what drives that number up or down — and how to make sure you're getting a fair deal.
What Affects the Price?
1. Project Size
Larger projects tend to cost less per square foot because the fixed costs (mobilization, forms, finishing crew) get spread across more area. A 500-square-foot patio will cost more per square foot than a 5,000-square-foot parking lot.
2. Site Preparation
If your site needs grading, soil stabilization, or demolition of existing concrete, that adds to the cost. In South Texas, where soil conditions can vary significantly, proper site prep is critical for a slab that lasts.
3. Concrete Finish
A basic broom finish is the most affordable option. Stamped concrete, exposed aggregate, colored concrete, or polished finishes add cost but dramatically improve appearance. Expect to add $2–$6 per square foot for decorative finishes.
4. Reinforcement
Standard flatwork uses wire mesh or rebar for reinforcement. Commercial projects or areas with heavy vehicle traffic may require thicker slabs and additional reinforcement, which increases material and labor costs.
5. Location and Access
Projects in remote areas or sites with difficult access (narrow driveways, hillside lots) can cost more due to delivery logistics and equipment positioning.
Typical Price Ranges in Texas
| Project Type | Price Range (per sq ft) | |---|---| | Basic driveway | $6 – $10 | | Patio (broom finish) | $7 – $11 | | Stamped/decorative patio | $10 – $16 | | Commercial parking lot | $5 – $9 | | Sidewalk | $6 – $10 | | Warehouse floor | $5 – $8 |
These are general ranges. Your actual cost depends on the specific factors above.
How to Get the Best Value
- Get multiple estimates. We always recommend getting at least two or three quotes so you can compare scope, not just price.
- Don't just go with the cheapest bid. Low bids often mean corners will be cut — thinner slabs, less reinforcement, or poor finishing. Concrete done right lasts decades. Concrete done cheap cracks in years.
- Ask about the full scope. A good estimate should include site prep, forming, pouring, finishing, and curing. Make sure nothing is left out.
- Check references and licensing. In Texas, make sure your contractor is licensed and insured. Ask to see recent projects similar to yours.
Get a Free Estimate
At 365 Builders, we provide detailed, transparent estimates for every concrete flatwork project — residential or commercial. We handle everything from site prep to final finishing, and we stand behind our work.
Call us at (956) 607-0470 or request a free quote to get started.